Our product range is constantly changing with new items being added regularly. Please keep checking our website for new products and fresh ideas. |
Reclaimed handmade brick
The beauty of our handmade bricks is that they are completely individual. Their shape and size vary slightly from each other as do their colours . Available from light sandstone through to deep red terracotta colour.
These bricks were made in the XIX. Century and are perfect for any feature brick work or ideal for flooring.
We stock two sizes of handmade bricks.
Large handmade brick
12 inches x 6 inches x 2,5 inches ( 30 x 15 x 6 cm )
Each brick weighs 5 kg.
Small handmade brick
9,5 inches x 5 inches x 2,5 inches ( 24 x 12 x 6 cm )
Each brick weighs 3,5 kg. |
 |
Pavers/Attic Bricks
These are also handmade bricks but were specifically used in lining attics. Hence the unusual but very practical size of 8 inch x8 inch x1.5 inch, more like a thick terracotta tile. These are ideal for interior and exterior flooring. Like bricks they are unglazed but can be sealed when used on interior applications. Because of their thickness they are great load bearing tiles for driveways etc. Also available as 7inch x 10 inch, 9 inch x 9 inch and other varying sizes.
|
 |
Cobblestone
Renowned for being extremely hard wearing, these basalt hand cut blocks have been removed from various public road or pedestrian street areas. Again a superb driveway or pathway solution and impervious to all weather conditions. As the blocks are hand cut they will give a unique appearance when laid.
As they are hand cut each cobble is unique and hence all sizes are different but a typical size per cobble is 6”x6”x6”
|
 |
Reclaimed Sawn Beams
These are planks sawn from antique, (100-200 years old) pine beams reclaimed from demolished buildings. Very good for furniture manufacture (rustic table tops etc) and interior décor applications (floor, wall, cladding etc.) Due to their age they are completely seasoned and hence stable and will not shrink / swell.
Available in lengths from 78” to 234” (2-6 meters), 4” to 12” (10-30cm) in width and up to 4” (10cm) thick.
|
 |
Reclaimed Pine Flooring
These are actual reclaimed pine floorboards and ceiling cladding from warehouses or mills which have a wealth of character and “well used” look. Wonderful for re-using as flooring or traditional cladding, gives a period feel and a warm character appearance. All of this product comes washed and nails removed.
Available in lengths from 86” to 196” (2.5-5 meters), 6”-12” (15cm-30cm) in width and up to 1” (2.6cm) thick.
|
 |
Reclaimed Prepared Planking
Similar product to the two above but more prepared. Would suit the same applications as above but with a more uniform look, not so rustic. Has the same seasoned properties and would suit furniture manufacture or interior floor / wall applications. Will still stain or colour to give a rich older appearance as opposed to new “white pine”
Available in lengths up to 84” (2.1 meters), up to 40” (1meter) widths and 1.4” (4cm) thick.
|
 |
Hand Worked Floorboards
Reclaimed and prepared planking (as above) but hand finished with a 50mm hand plane. Gives an excellent finish of wood having been finished or shaped with an Adz as was the practice in the 16th and 17th Century. Provides a wonderful worn period look and with the right staining or painting will fit any period theme.
Available in lengths up to 84” (2.1 meters), up to 40” (1meter) widths and 1.4” (4cm) thick.
|
 |
Reclaimed Timber Flooring
These are tongue and groove boards made from reclaimed beams etc and are prepared to a higher degree. These will give a more uniformed look, I.e. less rustic than the hand planed boards. Can be stained and sealed as normal.
Available in lengths up to 156” (4 meters), up to 8” (20cm) widths and up to 1” (2.5cm) thick
|
 |
Hand Planed Reclaimed Timber Flooring
These are the same as reclaimed timber flooring above but hand planed to give a more textured rustic and antique look.
Available in lengths up to 156” (4 meters), up to 8” (20cm) widths and up to 1” (2.5cm) thick
|
 |
Reclaimed Hand Hewn Pine Beams
These are beams that have been removed from buildings during demolition. They are from the 18th and 19th centuries and were all shaped with hand tools, not by machine. Can be used in old building reconstructions such as barn conversions etc . They can be used as load bearing beams or simply as show wood. Beams come washed and nails removed. Oak beams available soon.
Available in varying lengths but up to 468” (12meters) and typical thickness of 8”-12” (20cm-30cm)
|
 |
Frames from Reclaimed Timber
Rustic picture and mirror frames. Available as ready made frames or in lengths so that you can make your own. All sizes available and comes uncut in 2 meter lengths.
|
 |
|